卡西欧CASIO DT940数据采集器程序安装及数据传输方法
1、使用安装盘按提示安装MULTIDROP到PC上
2、在程序组中打开MULTIDROP
3、第一次使用请注意以下设置:
1.Settings-->Operative setting:1
2.Settings-->File setting:
Application storage directory:应用程序存放路径
c:\DT940\mot(建议)
Receiving data storage directory:上传数据存放路径
c:\DT940\up(建议)
Transmitting data storage directory:下传数据存放路径
c:\DT940\down(建议)
Transmitting file type:All
3.Settings-->Communication setting:
COM speed:19200BPS
Parity:None
Data length:8bit
Stop bit:1bit
COM port:COM0 对应PC-COM1
COM1 对应PC-COM2,请按使用需要设定
2.使用建议:
将应用软件软盘连目录一起拷贝到C盘根目录(C:\)下
c:\DT940\mot\apsmp.map
c:\DT940\mot\apsmp.mot
c:\DT940\mot\patch001.lod
c:\DT940\mot\patch002.lod
c:\DT940\downfont\font6sk.fon
3.下载应用程序到CASIO DT940数据采集器:(此步骤只在DT940无应用程序时使用)
1、确定font6sk.fon中文字库在c:\DT900\downfont\子目录下
2、确定以下四个文件存在与c:\DT900\mot子目录下
apsmp.map 应用程序
apsmp.mot 应用程序
patch001.lod 补丁文件
patch002.lod 补丁文件
3、连好通讯线及通讯座到PC
4、PC上运行MULTIDROP
Settings-->File setting:
Application storage directory:应用程序存放路径
c:\DT940\mot
Receiving data storage directory:上传数据存放路径
c:\DT940\up
Transmitting data storage directory:下传数据存放路径
c:\DT940\downfont
Transmitting file type:All
单击 OK
单击《Execute》,使PC处于等待状态
5、CASIO DT940数据采集器端操作:
关机状态下,按住<S>,<.>,同时按<PW>,DT940热启动
DT940显示系统菜单,
1. 系统设置4.TRANSMIT-->5.PROTOCOL-->2.MULTI DROP
6.PORT-->1.IR
7.SPEED-->3.19.2
4.TRANSMIT-->4.UTILITY-->5.FILE MODE-->2.DT700 MODE
4.CHG MEM SIZE-->208K
将DT900置于通讯座上 |